Thanks for your submission. A customer service agent will be in touch soon to help you further.
Features & Benefits
- Thermostat range adjustable from 0 F to 100 F (-18 C to 38 C)
- Four 10-32 x self-tapping screws are included with each heater
- Ball bearing fan
- Terminal strip with clamp connector that accepts both solid and stranded wire
Industry Standards
UL 508A Component Recognized; File No. E61997
CSA Certified, CSA File No. LR42186
CE
Specifications
|
Catalog Number
|
Height
|
Height
|
Width
|
Width
|
Depth
|
Depth
|
Nominal Capacity Watts
|
Nominal Voltage
|
Voltage AC
|
Max Current
|
Material
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| DAH1001A | 5.5 in | 140 mm | 4 in | 102 mm | 4 in | 102 mm | 100 W | 115 V | 100 V | 0.98 A | Aluminum |
| DAH13001C | 7.5 in | 191 mm | 5 in | 127 mm | 6.53 in | 166 mm | 1300 W | 115 V | 100 V | 11.5 A | Aluminum |
| DAH2001A | 5.5 in | 140 mm | 4 in | 102 mm | 4 in | 102 mm | 200 W | 115 V | 100 V | 1.89 A | Aluminum |
| DAH4001B | 7.5 in | 191 mm | 4.25 in | 108 mm | 4.38 in | 111 mm | 400 W | 115 V | 100 V | 3.72 A | Aluminum |
| DAH8001B | 7.5 in | 191 mm | 4.25 in | 108 mm | 4.38 in | 111 mm | 800 W | 115 V | 100 V | 7.37 A | Aluminum |
| DAH1002A | 5.5 in | 140 mm | 4 in | 102 mm | 4 in | 102 mm | 100 W | 220 V | 200 V | 0.49 A | Aluminum |
| DAH13002C | 7.5 in | 191 mm | 5 in | 127 mm | 6.53 in | 166 mm | 1300 W | 220 V | 200 V | 5.7 A | Aluminum |
| DAH2002A | 5.5 in | 140 mm | 4 in | 102 mm | 4 in | 102 mm | 200 W | 220 V | 200 V | 0.95 A | Aluminum |
| DAH4002B | 7.5 in | 191 mm | 4.25 in | 108 mm | 4.38 in | 111 mm | 400 W | 220 V | 200 V | 1.86 A | Aluminum |
| DAH8002B | 7.5 in | 191 mm | 4.25 in | 108 mm | 4.38 in | 111 mm | 800 W | 220 V | 200 V | 3.69 A | Aluminum |
These electric heaters are not designed for use in dusty, dirty, corrosive, or hazardous locations. Portions of the heater can get hot. Adequate protection must be taken to protect people from potential burns, and to protect other components from this heat. nVent recommends this heater only be installed in a totally-enclosed metal enclosure.
DO NOT INSTALL HEATERS ON WOOD PANELS. Heat sensitive components should not be placed near heater discharge area since this air can be quite warm. The clearance range defines the space that must be kept free of these components for proper and safe operation of the heater.